How to choose a Christmas tree storage bag that fits

A Christmas tree storage bag needs room for the longest rigid section and the widest part of the folded bundle. The assembled tree height tells you which size to look at first. Once the tree is taken apart, its shape depends on how the sections lie together and whether you keep the stand in the same bag. Start with the box dimensions from the product page if you have yet to buy the tree. If you already own it, measure the sections in the position you will use for storage.

Three storage bag sizes in the catalogue

These are the dimensions listed on the bag pages. Seams, corners and the zip opening can reduce the usable space. The two larger bags share a listed length of 140 cm. The 2.5 m bag adds room across the bundle. If the longest section is already too long for the opening or the inside of a 140 cm bag, moving up to the wider bag may leave the same length problem.

How to measure a dismantled Christmas tree

1. Prepare the sections. Remove detachable decorations and unplug any separate lights. Follow the instructions for taking the tree apart. Lay the dry sections out on a clear floor or work surface.
2. Find the longest rigid section. Measure from one end to the other, including the central pole and any fittings that stick out. Check each section if two look similar in length.
3. Arrange the bundle. Fold the branches gently into their storage position and lay the sections together as they would sit in the bag. Record the maximum width and depth without pressing down on the tips. If you rearrange the sections, measure again.
4. Account for the stand. Include it in the measurements if you plan to store it inside. Wrap sharp edges or put the stand in a separate container so the fittings stay clear of the foliage and fabric.

Compare your longest measurement with the bag length, then check both shorter dimensions. Look at the opening as well. A bundle that fits in the main compartment still has to pass the zip. If the tips catch or the fabric has to stretch for the zip to close, reposition the sections or try a roomier bag.

Worked examples using the Alpine range

1.8 m green Alpine

The box for the 1.8 m Alpine measures 30 × 30 × 100 cm. The 40 × 40 × 120 cm bag adds 20 cm on the long side and 10 cm on each short side when you compare the listed dimensions. Use those figures as a starting point, then check whether the folded sections and stand fit through the opening without force.

2.1 m green Alpine

The 2.1 m Alpine comes in a box measuring 35 × 35 × 120 cm. The 50 × 40 × 140 cm bag gives 20 cm more length and 15 cm and 5 cm more across than the box on paper. Check the 40 cm side first because it has the smaller margin. If the bundle is wider than it is deep, try the orientation that leaves more room across its widest point.

2.5 m green Alpine

The 2.5 m Alpine has a listed box size of 40 × 40 × 140 cm. The 60 × 50 × 140 cm bag is wider and deeper, with the same nominal length. This is a case where measuring the longest section matters. If it measures close to 140 cm, check the bag's usable length and opening before buying.

Check where the filled bag will go

Measure the cupboard or storage opening and then the shelf inside. Door hinges and handles may reduce the available width. A shelf lip can make it harder to slide the bag in. Where the route includes a tight corner, try moving a strip of cardboard as long as the longest section. A flexible bag will still have a rigid pole inside it once packed. On the first fitting, close the zip slowly and make sure there are no tips in its path.

Label the bag if you store several trees or keep the stand separately. Include the model, height and where the fasteners are stored. When two bags share the sections of one tree, number them and take a photo of how you packed them. Next season, you can find the complete set and repeat the arrangement that gave each section room.

Frequently asked questions

Can I use the size guide for a potted or 3 m tree?

The shop does not automatically suggest bags for those trees. For a potted model, measure the rigid base. For a 3 m tree, check the length of each section and how many packages it came in. Contact the shop with the model name and your measurements to check the options.

Should I measure the box or the branches?

Use the box as a first estimate before purchase. If you have the tree at home, the folded bundle is a better guide to how you will pack it. Read the seasonal Christmas tree storage guide for preparation, dismantling and storage conditions.